Ford escape 2011

Moderator: Germes

Ford escape 2011

Postby whadi » 11 Jan 2015, 21:00

I would like to buy a video interface Lincoln Navigator because it is
compatible with my car and CS9320CE navigation box.

So if you can describe how can I connect them in my car. I read the manual but still vague.

Thanks a lot
whadi
 
Posts: 3
Joined: 11 Jan 2015, 20:48
Location: amman
Car: Ford Escape

Re: Ford escape 2011

Postby Chortenia » 12 Jan 2015, 16:18

Hi.
Dismantle the head unit, find 60 pin cable, which goes from the matrix to the board. Take it out and connect it to the following board
Image
using the following adapter with the FFC
Image (the one, which is 60pin)
The other side of the FFc should go back to the OEM board.

Do the same with touch.
Best regards,
Car Solutions Team
User avatar
Chortenia
CarSolutions Team
 
Posts: 510
Joined: 17 Sep 2010, 17:06
Location: Lviv, Ukraine
Location: Ukraine
Car: Chery Kimo

Re: Ford escape 2011

Postby whadi » 16 Jan 2015, 21:40

Hi.
Is there a video for that
whadi
 
Posts: 3
Joined: 11 Jan 2015, 20:48
Location: amman
Car: Ford Escape

Re: Ford escape 2011

Postby Yuretz » 19 Jan 2015, 11:38

whadi wrote:Hi.
Is there a video for that

Unfortunately, we have no video of installation.
User avatar
Yuretz
CarSolutions Team
 
Posts: 264
Joined: 07 Feb 2012, 16:53
Location: Ukraine
Location: Lviv/Ukraine
Car: Fast as the wind

Re: Ford escape 2011

Postby whadi » 26 Jan 2015, 16:18

Hi,
I connected PNL to touch panel direct, and PCB cable , original touch cable with converter.
is this correct or not.
whadi
 
Posts: 3
Joined: 11 Jan 2015, 20:48
Location: amman
Car: Ford Escape

Re: Ford escape 2011

Postby Chortenia » 27 Jan 2015, 12:10

Yes, it's correct.
Best regards,
Car Solutions Team
User avatar
Chortenia
CarSolutions Team
 
Posts: 510
Joined: 17 Sep 2010, 17:06
Location: Lviv, Ukraine
Location: Ukraine
Car: Chery Kimo


Return to Other

Who is online

Users browsing this forum: No registered users and 0 guests

cron